ESE ES-101GPS Based Time Code Generator / Master Clock

ESE ES-101GPS Based Time Code Generator / Master Clock

  • $995.00
    Unit price per 


    Features:
  • Optional SMPTE, EBU, IRIG-B or IRIG-E output (SMPTE option shown)
  • ASCII (RS-232C) And ESE time Code Outputs
  • Dual 1 PPS Output (20% and 50% Duty Cycles)
  • Indoor/Outdoor Antenna with 16' Cable
  • Digital, Video & Analog Slave Clocks Available
  • Automatic Daylight Savings Time Correction
  • < 500 Nano-Second Accuracy
  • Time Zone Offset
  • GPS "Lock" indicator
  • Loss of GPS Signal Output
  • Legally Traceable to UTC (Coordinated Universal Time)
  • Rugged Desk Top Enclosure
  • Options available: 10nS, 6-Digit(2), 9-Digit(2), Ant, B(4), BBU(2), DC, EBU, HR, R, IRIG-B, J(3), K(2)(8), P, P2, SMPTE(or EBU), RS(1), W(1)
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously, although reception of only one is required for time data to be output. Several options are available that allow the unit to meet most any requirement asked from a Master Clock or Time Code Generator. Options available include SMPTE, EBU, IRIG-B or IRIG-E time code outputs. Many other options are available and are listed above

    Options List
  • (10nS) 10nS Accuracy: The accuracy of the unit is improved to 10nS.
    List: $300
  • (Black)Black Anodized Front panel-option availabel when standard panel is clear anodized
    List: $15
  • © Crystal Time Base (2-3 seconds per week accuracy)
    List: $60
  • (ESE) ESE Serial Time Code Output
    List: $30
  • (EXT{1,5 or10}) External Input of either 1 MHz, 5 MHz, or 10 MHz (for use with "in-house" Standard)
    List: $70
  • (IRIG) IRIG-B or IRIG-E Time Code may be specified (not available with SMPTE/EBU)
    List: $300
  • (NPR) NPR (National Public Radio) Time Code INput (excluxive) with ESE Time Code Output
    List: $135
  • NTP NTP Client Display will synchronize exclusively with an NTP server
    List: $120
  • (6-Digit) Six-Digit Display: A 6-Digit (Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
    List: $200
  • (9-Digit) Nine-Digit Display: A 9-Digit (Days, Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
    List: $300
  • (Ant) GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
    List: $195
  • (B) Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
    List: $300
  • BBU Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
    List: $130
  • (TZ) Time Zone Offset via internal DIP Switch
    List: $30
  • (Q) 9" x 3 1/2" Front Panel for Console Mount Applications (Case is 8" Deep)
    List: $80
  • (RS) RS232C ASCII Computer Interface (RS422A available on a custom basis)
    List: $50
  • (UL) "UL" Approve Wall Mount Power Supply
    List: $60
  • (V) DC Power (12 VDC)
    List: $30
  • (W) 3-Wire Line Cord (2-Wire Line Cord is Standard on many units)
    List: $16
  • (Wall) Wall Mount Enclosure replaces standard enclosure
    List: $80
  • (DC) DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
    List: $250
  • (SMPTE/EBU)SMPTE or EBU Time Code outputs: SMPTE or EBU Time Code outputs may be specified (not available with IRIG).
    List: $300
  • (HR) Relay Closure: Option "HR" provides a user programmable relay contact closure. The standard contact closure occurs on the Hour and Half Hour. If contact closures at other times are desired, the user can program up to four relay closures using the PC Software, which can be downloaded from the ESE web site. The reed relay is rated at 10 watts maximum resistive load (500 mA switching current) and is intended for control applications only. The relay contacts are accessible on the DB-9 connector.
    List: $50
  • (J) 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
    List: $30
  • (K) provides a 10 MHz output and a 1 KHz output. Option '10ns' is required if option 'K' is specified. UL "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
    List: $300
  • NOTES:
    1) Included at no charge
    2) Option 'P' is required
    3) EBU and/or PAL may also be specified
    4) Specify the ES-169B
    5) Not available with option "Wall"
    6) ESE time code output option may be specified if ordering 'NTP' option
    7) Specifying option 'NTP' for the ES-185U or the ES-911/GPS provides an NTP server, option price is $400
    8) '10ns' option must be specified

    Custom "DST" available @ 150 on any Master Clock with DST feature

Please note the PDF below to select the options available for the ES-101.