Earthworks FW430TPBmp FlexWand Cardioid 4ft model 30Hz to 30kHz Tripod Base Pair

Earthworks FW430TPBmp FlexWand Cardioid 4ft model 30Hz to 30kHz Tripod Base Pair

  • $3,599.00
    Unit price per 


4.7 foot Cardioid microphone, boom and stand in a matched pair
The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don?t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.

Features:

  • Uniform frequency response on or off axis
  • Flat from 50Hz to 20kHz within + 2dB at 6 inches
  • Will handle up to 145dB SPL
  • No handling noise
  • Rejects RFI
  • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
  • Large flex section near the center of the stand that couples the stand and the wand
  • Mini-gooseneck between the end of the wand and the microphone head
  • Incredible gain before feedback
  • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand will reject much of the sound of the band or orchestra
  • The near perfect polar response of the FlexWand allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
  • Tripod base
  • Available in cardioid and hypercardioid models

Specifications:

  • Matched Pair
  • Frequency Response: 30Hz to 30kHz ?2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid or Hypercardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
  • Min Output Load: 600? between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Positioning Range: From 1.5 ft. to 7 ft. above floor level
  • Gooseneck: Rigid center with nominal 2.5? to 3? flex on both ends
  • Dimensions: Stand 4?7? (140cm); Base 12? (30.5cm) in diameter, 1.1? (2.7cm) high each
  • Weight: Stand 2 lbs (.9kg); Tripod base 3 lbs (1.36kg) each

Includes:

  • SRW3 -Foam Windscreen for FlexWands & SR25
  • LP1530 - LevelPad switchable -15 or -30db
  • FWTCB - Tripod base for all FlexWand models
  • FWCIB - Cast Iron base for all FlexWand models
  • FWEXT-2 Two foot extension
  • FWEXT-3 Three foot extension