Earthworks DFK1 Drum Full Kit Sytem 1

Earthworks DFK1 Drum Full Kit Sytem 1

  • $11,499.00
    Unit price per 


The Drum FullKit is the ultimate, and every drummer?s dream. The nine FullKit microphones allow you to mike every piece of your entire drum set (2-OH, 1-hi-hat, 1-snare, 4-toms & 1-kick drum) with Earthworks? High Definition Microphones.

Features:

  • Improved impulse response for faster and more accurate transients
  • Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier loud attacks
  • Extended frequency response to 30 kHz to capture a crisper and more realistic image
  • Near perfect polar patterns that remain even across all frequencies and at any position within the pattern
  • More cohesive and unified drum sound
  • Hear more attack and subtle detail
  • Increased detail and dynamic range
  • Versatile, multi-use mics
  • Mics are protected in a high impact case
  • Ideal three-mic choice for live performance or recording in less than ideal acoustic environments
  • Fast setup and teardown
  • 5 DP30/C tom & snare microphones, 5 RM1 RimMounts, 9 LevelPads, 1 windscreen to mike snare, 2 windscreens for mounted toms, 2 windscreens for floor toms, 2 SR25s for overheads, 1 SR30 for hi-hat, 1 SR30 for kick drum, 1 KickPad, 2 SRW2 Stainless Steel vocal windscreens, 2 high-impact road cases

Specifications:

  • DP30/C
  • Frequency Response: 30Hz to 30kHz ?2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Signal-to-Noise Ratio: 72dB A-weighted
  • Output: XLR (pin 2+)
  • Output Impedence: 100? balanced (50? each pins 2 & 3)
  • Min Output Load: 600? between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 275mm x 22mm (10.75 x .860 inches)
  • Gooseneck Length: 159mm (6.75 inches)
  • Weight: .25 lb. (1.13kg)SR25
  • Frequency Response: 50Hz ? 25kHz ?2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
  • Min Output Load: 600? between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)
  • Weight: .35 lb (160g)SR30
  • Frequency Response: 30Hz ? 30kHz ?2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid or Hypercardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
  • Min Output Load: 600? between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 212mm x x 22mm (8.4 x .860 inches)
  • Weight: .5 lb (225g)

Includes:

  • LP1530 - LevelPad switchable mic pad -15 or -30dB
  • KP1 - KickPad Mic level kickdrum processor
  • MC1 - Standard microphone clip for all drum mic models
  • MC2 - Shock Mount microphone clip for all drum mic models
  • PW1 - Foam teardrop windscreen for Drum Periscope Series
  • RM1 - Drum RimMount for Drum Periscope Series
  • SRW2- Stainless Steel Windscreen for SR30 & SR30/HC
  • SRW3 - Foam Windscreen for SR25
  • DFK-C -High Impact Case for FullKit DrumKit Mics (requires 1 CMK-C & 1 DFK-C)