ARX DI-6-SM Changes from 6 Direct Boxes and Mixer to a 6 Way Splitter
- All new Updated version of our Unique Pro Audio problem solver
- Six Direct boxes, Mic or Line Splitter and Line Mixer in one unit!
- Balanced XLR Mic input with Gain control
- Multiple modes: Six in, Six out; Six in, One out; One in, Six out
- Individual Output Ground lift switches
- Up to +15dB Gain available per channel
- Balanced XLR Outputs; High Impedance Jack Ins and Outs
- Flawless performance in any audio environment
MP3 players, Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers, bass guitars, computers; at some stage all these need linking up to Balanced inputs, whether the application is Live sound, Studio or Broadcast.
A Pro Audio Toolbox
This unique and flexible audio toolbox allows Six independent unbalanced audio sources to easily and quietly interface with Balanced pro audio systems, either to individual channels or summed down to one Master output.
But that's not all
By pressing a single switch on the rear panel the DI-6SM will change modes from 6 Direct Boxes plus Mixer to being a 6 way Splitter (mic/line distribution amplifier). Now it will split an incoming microphone or line signal to 6 individual outputs or zones, with an XLR Loop Out to send the microphone output to a mixing desk as well. Switchable phantom power and Gain trim for the Mic input completes this new package. On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity (off) through 0dB to +15dB gain, and a Clip indicator LED. The Master section has a Master volume control and status LED's indicating whether the unit is in DI+Mixer or in Splitter mode. For your convenience there is also a balanced jack Mix output on the front panel, in parallel with the balanced XLR Mix output on the rear panel.
On the rear, each channel has an XLR Balanced output, with associated Ground lift switch and status LED, to isolate the chassis and electronic grounds. The Master section has a Balanced XLR output on the rear, and a Balanced Jack output on the front panel. In addition there is a Balanced XLR input with a switch to put the unit in either DI+Mixer or into Splitter mode. In Splitter mode there is a switch to toggle between Microphone and Line level input, as well as a Phantom Power switch and a Loop Output for a microphone signal to go to a Mixing desk as well.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch.
We Also Recommend
ARX Afterburner Unique Multi Mode Comp/Limiter for Dynamics Control