ART Pro Audio M-Five Figure-8 Ribbon Microphone
The ART M-Five has been engineered to deliver incredibly open and natural sounding recordings available only from a classic ribbon microphone design.
The active element of the ART M-Five is a very thin corrugated aluminum ribbon mounted under low tension between the poles of a strong magnet. This classic design delivers the warmest and most natural sound reproduction available from virtually any style of studio microphone. With incredibly fast and accurate transient response and stunning realism, the ART M-Five classic ribbon microphone is ideal for todays direct to digital recordings.
Although ribbon microphones are by their nature extremely fragile, the ART M-Five can handle high sound pressure levels approaching 148dB range. The low-tension 2-inch long, 2-micron thick aluminum ribbon design offers audio reproduction with smooth, natural extended low and high frequency response.
The asymmetrical figure-8 pickup pattern has an extended sweet spot on the rear face of the microphone allowing the recording to accurately reproduce the natural space and ambient reverberation of a good sounding live room.
The microphone's chassis is precision-tooled aluminum alloy with a dent resistant stainless-steel wire-mesh windscreen. The included shock-mount virtually eliminates vibration and handling noise, while at the same time safely securing the microphone in any position needed during the recording process.
Although it is never a good idea to apply any phantom power to any ribbon microphone, the ART M-Five does include a protection circuit in series with the microphone's XLR input to protect the fragile ribbon element from stray voltages that could otherwise irreparably damage the ribbon.
- Type: Ribbon Microphone
- Capsule: 2.5-micron 35mm Aluminum Ribbon
- Polar Pattern: Figure-8
- Frequency Response: 30Hz to 15kHz
- MAX SPL: 148dB
- Low Frequency Roll-Off: 12dB / octave @ 100Hz, 12dB / Octave @ 200Hz
- S/N Ratio: 70dB @ 1Pa
- Sensitivity: -54dB (=/- 3dB)
- Impedance: <600 ohms
- Recommended Load Impedance: <200 Ohm
- Power Requirement: Dedicated Power Supply
- Dimensions: 70mm x 160mm / 2.75 inches x 6.5 inches